5 Common Plumbing Issues and How to Fix Them
Few things are as frustrating as dealing with plumbing issues, especially when they pop up unexpectedly – almost always at the least convenient time possible – and have the potential to cause hundreds if not thousands of dollars in damage if they’re not remedied straightaway.
Below we highlight five of the most common plumbing issues you’re likely to bump up against and break down tips and tricks to fix them, too.
Remember, though, that you could always hire the best plumber Pasadena, CA has to offer and have them handle all of your plumbing problems for you – all without having to lift a finger on your own!
5 Common Plumbing Issues and How to Fix Them
Clogged Drains
This is a common problem that can be caused by a variety of things, such as hair, soap, grease, and food. To fix a plugged-up drain, you can try using a plunger to remove the blockage. If that doesn’t work, you can use a plumber’s snake, which is a long, flexible tool that can reach deep into the pipes to remove the clog.
Leaky Faucets
A leaky faucet can be frustrating and can also waste a lot of water. To fix a leaky faucet, you’ll first have to identify the source of the leak and replace the worn-out parts. This may require disassembling the faucet and replacing the O-ring, washer, or other parts.
Running Toilet
If your toilet is constantly running, it can waste a lot of water and drive up the water bill.
To fix a toilet that just keeps running all the time, you’ll need to identify the cause of the problem. This is sometimes caused by a faulty flapper, a leaky fill valve, or a problem with the float. Once you’ve identified the problem, you can try replacing the faulty part yourself or hire a plumber to do it for you.
YouTube is filled top to bottom with step-by-step guides to help you diagnose and repair pretty much every running toilet problem you could come across. Lean on this resource to get this issue squared away ASAP.
No Hot Water
If you suddenly find yourself without hot water, it might be due to a variety of issues, such as a faulty water heater, a broken thermostat, or a clogged vent.
To resolve this problem, you’ll need to diagnose the issue and take appropriate action. This may involve replacing the water heater, adjusting the thermostat, or clearing the vent.
Most hard water heaters today have troubleshooting instructions printed directly on them, too. Take advantage of these instructions to resolve your hot water heater issues on your own before calling in the professionals.
Low Water Pressure
If you’re still stuck dealing with low water pressure, it could be due to a clogged aerator, a problem with the main water line, or a faulty pressure regulator. You’ll know you’re dealing with low water pressure problems when you flip open a faucet and the water only starts to trickle out.
To fix this problem, you can try cleaning the aerator, checking the main water line for obstructions, or replacing the pressure regulator. If these solutions don’t work, you may need to call a plumber to diagnose and fix the problem.
The odds are pretty good that you’re going to have to contend with at least some of the plumbing problems we highlighted above as a homeowner in the years to come.
Keep this guide handy so that you can navigate these plumbing problems quickly and with as little frustration as possible.
Remember, though, that sometimes calling in the professionals and hiring the best Pasadena-based plumber instead of trying to fix these problems on your own is the right move.
Good luck!